Specifications and Features Pathfinder 48 ft. Euro Trawler

Basic Dimensions
  • LOA: 47’10” (14.57 m)
  • LWL: 45’2” (13.76 m)
  • Beam: 16’ (4.86 m)
  • Draft: 4’1.25” (1.25 m)
  • Max Speed: 9 knots
  • Holding: 100 gallons
  • Water: 300 gallons
  • Cruising Speed: 7to 8 knots
  • Range : 3000Nm at 7 kts, with 10% reserve
  • Fuel: 1200 gallons

Construction
  • Designed to exceed Lloyds special service craft for offshore service
  • 44W Hot rolled plate steel, pre blasted and primed with nippeceramo weldable primer
  • all steel plasma or laser cut from CAD files for accuracy
  • CSA and CWB approved welding standards
  • Awlgrip® epoxy primers interior and exterior
  • Awlgrip® top coat, owner‘s choice of color
  • Doors, hatches, ports and windows offshore rated
  • Yacht quality finishes

Machinery and Steering
  • Standard engine Volvo D-4 180 Hp, 4 cylinder diesel with marine transmission (Cummins QSB 5.9 230 Hp optional)
  • Complete engine instrumentation and control
  • 316L Stainless steel shaft
  • Tides Marine Dripless shaft seal
  • Michigan Wheel high torque propeller
  • Bronze sea water strainers
  • Marelon ball valve sea-cocks on all inlets
  • Racor Primary and secondary fuel filter
  • Wet exhaust system (optional separator)
  • Engine room blowers with noise isolated vents
  • Baffled steel fuel tanks with 2” fills and vents
  • Stainless steel ball valves at each end of fuel lines
  • Optional closed cell foam hull insulation
  • Optional engine room sound insulation
  • FireBoy - Fire suppression system
  • Plate steel rudder (optional high lift articulating rudder)
  • Manual hydraulic steering (power assist optional)

Deck Outfitting
  • Non-slip Awlgrip® coating standard
  • Stainless steel bollards and chocks
  • Stainless steel railings optional
  • Anchorlift self launching bow roller
  • 60 lb. plow anchor standard
  • Anchorlift - Mako 1500 electric windlass standard
  • 300’ chain rode plus 300’ 3/4” nylon rope standard

Interior Decoration
  • CAD designed interior
  • North American cherry wood interior Standard
  • Teak and holly flooring standard
  • Bedroom, saloon, galley and toilet with hanging lockers, desks and storage where applicable
  • Hanging lockers and cabinets with louvered doors
  • Mattress to be 5” thick, 4” for seats
  • Drawers/storage under bed
  • Reading lights and/or night lights aboard wherever applicable
  • Hand rails fitted in proper locations
  • Lewmar ports and hatches standard
  • Diamond Seaglaze pilothouse doors

Electrical System
AC
  • Marinco shore power inlet
  • Blue Sea Systems electrical panel
  • Ancor multi-strand tinned copper marine wire throughout
  • Galvanic Isolator standard, isolation transformer optional
  • AC receptacles throughout
  • Optional 9KW Fischer Panda genset
DC
  • Surrette/ Rolls heavy duty engine start battery
  • 2- 8D Surrette/ Rolls deep cycle house batteries
  • Blue Sea heavy duty battery switches
  • Blue Sea Systems electrical panel
  • Ancor multi-strand tinned copper marine wire throughout
  • Imtra high quality lighting fixtures
  • 6 - 24 lb. zinc anodes on hull, standard size bolted, not welded
  • Series 200 Perco -International navigation lights and anchor light installed

Plumbing
  • 300 US gallon integral water tank with shut off valves and vents designed to prevent salt water contamination
  • Fresh water system uses PEX piping and brass fittings
  • Jabsco Ultra- Max pressure water system
  • Barka bath and galley fixtures
  • Quick - hot water heater with electric and engine heat exchanger for domestic water supply
  • Johnson Pump - manual head upgradeable to electric
  • 3- Rule 2000 Bilge pumps

Owners Manual
  • warranty information
  • full systems drawings as fitted
  • equipment specifications
  • full stability booklet